1. Home
  2.  » 
  3. Our boats
  4.  » 
  5. Race catamarans
  6.  » Nacra F20 Carbon

Nacra F20 Carbon

The Nacra F20 Carbon is a result of the F18 Infusion. Nacra took all the best features and applied it into a new boat. So, the Nacra F20 Carbon has the same rudder system, mast extrusion, beams and other small bits and pieces compared to the F18 Infusion. The difference can be found in the hull shape and size of the boat.

You sail the Nacra 20 with a crew of 2, the boat is designed for both course and inshore/coastal distance racing. The boat comes standardly included with a high aspect Kevlar-carbon square top mainsail, a Kevlar-carbon high aspect jib and a full radial cut gennaker. All composite component toolings are CNC milled for accurate shape and high quality/low weight finish. The hulls are built out of a full carbon fiber sandwich construction with a pre-molded shaped core.

from € 32.999,-

Nacra F20 Carbon

The Nacra F20 Carbon shows resemblance with the hydrofoiling AC50 America’s Cup yachts. The design team of Morelli & Melvin also worked on the America’s Cup fleet and took their knowledge from this project and scaled it down to the F20 Carbon. The hull shape starts with a wave piercing bow forming a diamond shape hull stretching backwards into a square transom. With the combination of the curved dagger board this hull shape is of major importance.

Choose your Nacra

Nacra F20 Carbon FCS

With the Nacra 20 FCS you have the ultimate ‘flying’ racing catamaran in your hands. The FCS in Nacra 20 FCS stands for ‘Flight Control System’. During your sail, you get a controlled flight. Make alterations on the water during your flight to find the groove you are looking for and fly over water to leave others behind.

This Nacra is a benchmark in design. The FCS Main Foil, FCS T-rudder, rudder- system, spi-pole, boom and mast are built with state-of-the-art full carbon fiber construction. Using the best possible manufacturing techniques available to obtain maximum strength with minimum weight. With autoclave technology, curing the pre-impregnated carbon/epoxy at 120 degrees Celsius at an atmospheric pressure of 6 bar. It will put you ahead of the fleet in terms of performance and joy.

Your downwind experience will never be the same again, at times with enough wind and sailing without gennaker, you’ll still be foiling! These sails and technology are produced by the loft which the Olympic Nacra 17 sailors use as well.

Image gallery

Nacra F20 Carbon

Nacra F20 Carbon FCS

Technical data Nacra F20 Carbon

More information

Interested in this or other boats? Get in touch with Nacra Sailing by completing the form or click here to find a Nacra dealer in your area. 

You can also call the Nacra Sailing headoffice at
+31(0) 70 338 2900.

 

Prices on this website are excl. vat and subject to change without prior notice.

Select the boat you want more information about

15 + 11 =

About Nacra Sailing
Since 1975 Nacra has always been about empowering sailors. Getting the best out of yourself and your team with Nacra supplying the equipment. Reaching new heights and pushing your boundaries. That’s Nacra Sailing! Nacra & Perforance Sails are based in The Netherlands. Our Dutch company took over the original Nacra factory (Santa Ana, California) in 2007 with all it’s rights concerning the brand Nacra. Nacra has been originally founded in 1975 and draws it’s knowledge therefore from a long history of building and supplying catamarans to the world of sailing.

Address
Hellingweg 110 -116
2583 DX  Scheveningen
Netherlands

Office: +31(0) 70 338 2900
Fax: +31(0) 70 338 2901
Email: info@nacrasailing.com